Does the model suit your lighting task?
BRILONER LED bedside wall light stands in this selection for a reading light at the bed with a socket within 1.8 metres, no data sheet for the model and a contradictory wattage figure. That is a narrower and more honest statement than a blanket “good” or “poor”. A lamp can be technically decent and still disappoint in the wrong place. This review therefore starts with the intended use, not with a score.
The supplier states 400 lumens at 4.7 watts. Do the sum: 400 divided by 4.7 gives about 85 lumens per watt, 100 at the 4 watts given by one retailer, 80 at the 5 watts given by another. Class F begins at 85 lumens per watt under Regulation (EU) 2019/2015. Without an EPREL entry no class can be documented, and the wattage figure is inconsistent between the listings.
For this model there are 5 readable product features from the Amazon listing. They are not presented as independently confirmed measured values. We explicitly separate what the source states from our practical assessment. We do not claim any long-term, laboratory or room trials of our own. We reproduce the quoted listing texts unchanged in content, but apply the house style for punctuation: dashes become a colon or comma, ranges are written out with “to”, and special characters and advertising symbols are removed. Numbers, units and statements are left untouched.
Product data and sources
| Product | BRILONER LED bedside wall light |
|---|---|
| Brand | BRILONER |
| Category | Home lighting |
| ASIN | B07WW4VS85 |
| Sources as of | 21 October 2026 |
| Type of research | Data and source analysis; no laboratory or long-term trial of our own |
Listing statement: Modern LED reading lamp in black, made of metal
What the source states: Modern LED reading lamp in black, made of metal
Why this matters: This statement describes a product property, but does not yet answer whether it is practical for a reading light at the bed with a socket within 1.8 metres, no data sheet for the model and a contradictory wattage figure. What matters is the link to the planned location. This statement is not a property but advertising language. Only the GU10 holder with an LED light bulb is documented, and there is no data sheet for it.
Listing statement: Thanks to the flexible arm (50cm)…
What the source states: Thanks to the flexible arm (50cm) and the mounting options left, right and top you can control the light individually
Why this matters: This point should be checked against the dimensions, instructions and existing installation before you buy. A listing can contain variants or shortened wording.
Listing statement: With 4.7 watts, a light output of 400 lumens and a…
What the source states: With 4.7 watts, a light output of 400 lumens and a colour temperature of 3,000 kelvin the LED bedside lamp can also be used as a great reading light
Why this matters: The amount of light can only be assessed together with the beam angle, the distance and the area lit. A high figure alone does not say whether the light arrives in the right place. The 400 lumens are a supplier statement with no register entry. They describe the total luminous flux of the lamp, not the brightness on the book. At 4.7 watts this gives about 85 lumens per watt, 100 at the 4 watts given by one retailer, 80 at the 5 watts given by another. The wattage figure is not consistent: one retailer states 4 watts, another 5 watts for the same design with 400 lumens. Without a manufacturer document it is impossible to say which is right.
Listing statement: The LED bedside light is easy to switch on thanks to…
What the source states: The LED bedside light is easy to switch on thanks to the on/off switch and also impresses with an average lifetime of up to 20,000 hours and a cable length of 1800 mm
Why this matters: This statement describes a product property, but does not yet answer whether it is practical for a reading light at the bed with a socket within 1.8 metres, no data sheet for the model and a contradictory wattage figure. What matters is the link to the planned location. The lifetime is a pure supplier statement with no data sheet. It applies to the supplied light bulb and not to the light as a whole, and swapping in another GU10 lamp changes it.
Listing statement: Product dimensions: 403x217mm (HxP), base 35x35mm, head
What the source states: Product dimensions: 403x217mm (HxP), base 35x35mm, head: 58mm (D)
Why this matters: This point should be checked against the dimensions, instructions and existing installation before you buy. A listing can contain variants or shortened wording.
Use in daily life
Day to day, the mounting, the connection and the operation matter. The listing states mounting on the left, right or top, an arm of 50 centimetres and a cable of 1800 millimetres. The light is operated by a switch on the housing, which you must be able to reach from the bed. One retailer states a cable with a Euro plug, so you need a socket within reach.
For this model, the purchase decision should therefore hinge on a concrete situation. Before buying, write a sentence such as: “I need light for …” and add place, time of day and activity. If the model does not clearly fulfil this task, an alternative from the same category is probably the better choice.
What this light is not built for: it is not room lighting, because it directs light onto one point. It is not intended for the bathroom or outdoors, as one retailer states IP20. It is also no use as a therapy light, as light use does not replace medical treatment. And it is not dimmable, as far as that can be checked.
Strengths and limits of the assessment
What speaks for the model
- Product image, ASIN and listing data are clearly linked to one another.
- The design can be matched to a specific lighting task: for a reading light at the bed with a socket within 1.8 metres, no data sheet for the model and a contradictory wattage figure.
- The available features allow a targeted check before buying, without inventing a star rating.
What remains open
- No long-term use of our own, no light measurement and no documented load check.
- Listing details can be abbreviated or change with variants and model updates.
- Room effect, glare and ease of use depend on your location and daily routine.
This purchase mostly fails on expectations of brightness at the book, because 400 lumens apply to the lamp and not to the reading position. The second stumbling block is the paper trail: there is no manufacturer data sheet, no EPREL entry and contradictory wattage figures between the listings. The third is the cable, which stays visible on the wall.
What you should measure and check before buying
Measure the distance from the socket to the planned spot on the wall, because the cable is only about 1.8 metres long. Check whether left, right or top suits your bed, and whether the head, at 58 millimetres in diameter, reaches close enough to the reading position. Clarify in the listing whether a GU10 lamp is included in the delivery.
- Clarify whether you need a reading light or room light: These are two different classes of device. This light directs light onto one point and does not replace a ceiling light.
- Measure the distance to the socket: The cable is about 1.8 metres long. Plan the route of the cable along the wall as well.
- Check the mounting direction: Left, right or top: decide beforehand from which side the light should fall on the book.
- Clarify the light bulb status: Is a GU10 lamp included, and does it fit the holder? The listing says nothing explicit about this.
- Check the model designation and wattage: Compare the article number on the packaging with 2080-015, because retailers list 4, 4.7 and 5 watts for the same design.
If you are unsure how much light your room needs at all, work it out once: the lumens-to-watts chart translates wattage figures into actual brightness, and how many lumens per room are needed depends on area and activity. Further models from this area are in the overview under home lighting, and the lighting calculator translates your room into a concrete target brightness.
Set-up, position and first check
When setting up, what counts is that the mounting point matches the reading position and the cable reaches the socket. Do not touch the GU10 lamp after inserting it while it is hot. If you change the light bulb, observe the maximum permitted wattage marked on the light.
After set-up, do not judge the light only in daylight. In the evening, switch the rest of the lighting as you normally use it, and check the situation from seated, standing and walking height. Only then do disturbing reflections, hard shadows or an unfavourable switch position become visible.
Note down the model number and order date and keep whatever paperwork is in the box. For this item there are neither instructions nor a manufacturer page to download, and in the event of a complaint the retailer is the only point of contact. In a warranty claim, both are the only proof of which device you bought. Light bulbs and holders remain replaceable, so a later change of brightness or colour temperature is possible. This device is intended for indoor use only and is not approved for damp rooms or outdoor use.
Comparison with similar models
The comparison does not name winners. It shows models of the same category so that you can see whether one of them is closer to your lighting task. If two models have the same task in the Assessment column, they do not differ in purpose but in design, dimensions and features. The column then states what is actually different according to the sources.
| Model | Brand | Assessment | Details |
|---|---|---|---|
| BRILONER LED bedside wall light | BRILONER | for a reading light at the bed with a socket within 1.8 metres, no data sheet for the model and a contradictory wattage figure | This review |
| BRILONER indoor wall light, swivelling, GU10 holder up to 9 watts… | BRILONER | for reading light or accent light in dry indoor rooms with your own GU10 light bulb, with an open connection question: the listing does not state plug and switch | Read the review |
| ledscom.de wall light WAIKA | ledscom.de | for accent and reading light on the wall with your own GU10 lamp, not plug-in and not for the bathroom | Read the review |
Our buying decision
BRILONER LED bedside wall light makes sense if you are looking for a light for a reading light at the bed with a socket within 1.8 metres, no data sheet for the model and a contradictory wattage figure, you have checked the dimensions at the intended spot and you will actually use the functions named in the listing. The purchase is less convincing if you expect a universal solution for several conflicting lighting tasks.
Keep looking if key data such as dimensions, light output, IP rating or compatibility is not clearly documented for your intended use. The same applies if you only like the look of the design, but the cable, the floor space or the controls would get in your way in daily use.
We deliberately award no stars. A numerical score would suggest a measurement accuracy that does not exist without documented hands-on testing. The statement this page can support is narrower: which details are available, what the model may be suited for, and which questions remain open before you buy?
Frequently asked questions about the bedside light
Can the light bulb be replaced?
The title states a GU10 holder, and one retailer describes the lamp as supplied and replaceable by the user. We found no manufacturer document on this, so check in the listing whether a lamp is included in the delivery.
Does the light have a plug?
According to the listing it has a 1800 millimetre cable, and according to one retailer a 180 centimetre cable with a Euro plug. That points to a plug-in device that needs no electrician, but the manufacturer has not confirmed it.
How bright is the reading light at the bed?
The stated figure is 400 lumens at 3,000 kelvin, which is warm white light. How much illuminance reaches the book depends on the beam angle and the distance, and neither is documented.
Can the lamp be dimmed?
One retailer says it is not dimmable, while another listing mentions a touch sensor. Only a switch is documented, so do not count on dimming.
Is the light suitable for the bathroom?
No, one retailer states IP20, which means no protection against splashing water. It belongs in dry indoor rooms such as a bedroom or hallway.
How far can the light be swivelled?
The listing states a flexible arm of 50 centimetres and mounting on the left, right or top. No swivel angle in degrees is given anywhere, so the reach can only be derived from the dimensions.
Sources and currency
The sources are ranked by their closeness to the product: manufacturer documents come before retailer or comparison data. A shop listing is useful for the variant currently on offer, but it is not an independent check. Missing documents are not replaced with invented experiences.
- Listing page for ASIN B07WW4VS85 (retrieved 21 October 2026): GU10, 4.7 watts, 400 lumens, 3,000 kelvin, metal, black, flexible arm 50 centimetres, mounting left, right or top, switch on the housing, cable 1800 millimetres, rated lifetime up to 20,000 hours according to the supplier, dimensions 403 by 217 millimetres, base 35 by 35 millimetres, head 58 millimetres in diameter. A supplier statement, not a manufacturer document. Amazon listing B07WW4VS85, not linked
- Retailer page lights.co.uk for the Briloner Tuso LED wall light, retailer article number 1510467 (retrieved 21 October 2026). Design with the same dimensions: 40.3 centimetres high, 21.7 centimetres projection, head 5.8 centimetres. Stated are 4 watts, 400 lumens, 3,000 kelvin, GU10 supplied and replaceable, not dimmable, switch in the base, cable 180 centimetres with Euro plug, Class II, IP20, weight 0.182 kilograms. Retailer statement, not a manufacturer document.
- Retailer listing on eBay for the Briloner Tuso in black (retrieved 21 October 2026): manufacturer number 2080015, 5 watts, 3,000 kelvin, GU10, switch, dimensions 40.3 by 21.7 centimetres. Used here only as evidence that the same design is listed with a different wattage figure.
- Manufacturer home page briloner.com (retrieved 21 October 2026), reached via the redirect from briloner.de. The page loads, its visible text contains neither Tuso nor 2080-015, and no data sheet or instructions for this model were found.
- EU product register EPREL, query of the light source interface by model designation 2080-015 and 2080015 (retrieved 21 October 2026) with Referer and User-Agent headers: zero hits each. No energy class is therefore registered for this model.
- Amazon product listing B07WW4VS85; product data via the Creators API, retrieved 21 October 2026 Advertisement
Content checked on 21 October 2026. Prices, availability and product variants can change independently of this page. For the final check, always use the current retailer listing and any available manufacturer documents.
If a linked source is no longer reachable, or the model on offer visibly differs from the product image and designation, this analysis is no longer the right basis for a decision. In that case the current model number is what counts. Tell us about the difference via the contact page (in German), so that the data, the link and the recommendation can be checked.
