Home / Home lighting / ledscom.de WAIKA wall light

Research analysis for wall lights with GU10 spots

ledscom.de wall light WAIKA

For a wall light without a light bulb, the decisive factor is not the lumen figure but the connection and the lamp you fit. The light itself supplies no light and no brightness figure. What matters is an existing supply cable at the wall, a suitable GU10 light bulb and use in a dry interior.

AI-assisted text, editorially reviewed · Images are real product photos, not AI images · Details

By Seydhan Cakmak, TopLampenReviews editorial teamSources as of: 21 October 2026Updated: 21 October 2026
Current Amazon priceCheck price on AmazonPrice may change at any time
Price and availability at Amazon Advertisement · Affiliate link · Data may change in the shop
ledscom.de wall light WAIKA, two-bulb with rocker switch, 2x GU10 without light bulb

Classified at a glance: Indoor wall lights: reading light and accent light

Assessment in 30 seconds

In our selection we place this model as accent and reading light on the wall with its own GU10 lamp. It is not intended for plugging in and not for the bathroom. That is our assessment based on the design, not a statement by the manufacturer. The available sources comprise 7 evaluated listing details, one verified product image and one checked manufacturer document with model data, plus 2 further verifiable references without model data. The purchase only makes sense once design, connection and controls suit your specific use.

Does the model suit your lighting task?

ledscom.de WAIKA wall light stands in this selection for accent and reading light on the wall with its own GU10 lamp. It is not intended for plugging in and not for the bathroom. That is a narrower and more honest statement than a blanket “good” or “bad”. A lamp can be technically decent and still disappoint in the wrong place. That is why this analysis starts with the intended use, not with a score.

The decisive figure is the power limit of the holders: according to the manufacturer a maximum of 60 watts per GU10 holder, so up to 120 watts together. An LED lamp of 5 to 8 watts stays far below that. Luminous flux, colour temperature and beam angle are printed on the lamp, not on the light. Because no light bulb is included, there is no energy efficiency class for this product either.

The listing carries 7 usable product features. The 6 most informative are assessed individually below. They are not presented as independently confirmed measurements. We explicitly separate what the source states from our practical assessment. We do not claim any long-term, laboratory or room trials of our own. We reproduce the quoted listing texts unchanged in content, but apply our house punctuation: dashes become a colon or comma, ranges of values are written out with “to”, and special characters and advertising symbols are removed. Figures, units and statements remain untouched.

Product data and sources

Productledscom.de wall light WAIKA
Brandledscom.de
CategoryHome lighting
ASINB093LSCRKH
Sources as of21 October 2026
Type of researchData and source analysis; no laboratory or long-term trial of our own
How to read the table: Product name, image and listing features were matched to ASIN B093LSCRKH via the Amazon Creators API. Where a manufacturer document is available, it appears in the sources block. Marketing wording is not quietly reinterpreted as measurement results.
Manufacturer document checked in detail: The connection decides this purchase, and the Amazon listing says nothing on exactly that. It names a rocker switch and a 230 volt connection, but neither a cable nor a plug. The manufacturer's page at ledscom.de (retrieved 21 October 2026) lists the light under item number V-0035 and the black version under LC-L-286, and gives a three-pole terminal block as the connection, with no cable length and no plug. The Class I rating with protective earth conductor fits this. So plan for a fixed connection to an existing supply cable at the wall, not for a device you plug in. In case of doubt that is a job for a qualified electrician: in England and Wales, Part P of the Building Regulations covers this kind of fixed wiring work. On the brand situation: ledscom.de is a retailer and manufacturer of LED lights, the shop now sits at leds-com.de, and the old address redirects there permanently. There is a product page there for the WAIKA series with technical details. We did not find a data sheet as a separate document, nor a manual or installation instructions as a PDF. For this analysis exactly one manufacturer document therefore counts, the product page, and it describes the series and not each colour variant individually. The product page lists colour and light bulb as selectable. Whether the version sold on Amazon without a light bulb is identical to the LC-L-286 version is plausible, but not expressly documented. On construction: according to the manufacturer, two GU10 holders of at most 60 watts each sit in an angular wall light in matt black. According to the manufacturer the spot heads can be tilted by 90 degrees and rotated by 330 degrees, and the Amazon listing gives the same values. The switch is a rocker switch. The manufacturer states that sets with a dimming function cycle through three brightness levels by repeated pressing. The version without a light bulb is therefore simply an on/off switch. According to the manufacturer, the light's scope of delivery comprises the light, two wall plugs, two screws and a suction cup, and with sets two light bulbs are added. The Amazon listing confirms: light bulb not included. On checking the numbers: there is no lumen, kelvin or watt figure for the light itself, because without a light bulb it produces no light. Brightness and colour temperature are determined by you alone with the GU10 lamp. The statement max. 60 W in the Amazon title is ambiguous: the manufacturer's page gives 60 watts per holder, so a total of up to 120 watts would be permitted. With LED lamps that is far more than you will ever use. A GU10 LED of 5 to 8 watts is enough for accent and reading light, so two of them together draw only a fraction of the limit. Because no light bulb is supplied, we did not search for an entry in the EU product database EPREL for this product and did not check an energy efficiency class. The class will appear later on the packaging of the lamp you buy. The factor from Annex II of Regulation (EU) 2019/2015 does not apply here. What the listing does not support: the listing calls the wall light a reading light, while the manufacturer's page calls it a wall spot. A reading light in the narrower sense has an adjustable arm and a lamp that is aimed deliberately at the book. Here there are two short spot heads that sit close to the wall. For reading in bed you need a low-glare light bulb with a narrow to medium beam angle and a mounting height at which you do not look straight into the lamp. The statement that no transformer is needed also only means that the GU10 holder works on mains voltage. The IP20 rating applies according to the manufacturer, so dry interiors only, not the bathroom and not outdoors. We have not adopted a guarantee period, because we could not verify it against the primary source. Without documented hands-on testing, it also remains open how firmly the heads hold in their set position.

Listing detail: Versatile use, with its simple design…

What the source says: Versatile use, with its simple design the Waika wall light is an excellent choice for the whole interior and offers versatile uses. Use the wall spot in different rooms such as the living room, the kitchen or the office to set targeted accents of light and create pleasant lighting.

Why this matters: This statement describes a product property, but does not yet answer whether it is practical for accent and reading light on the wall with its own GU10 lamp. What counts is the link to the planned location.

Listing detail: Practical on/off switch, the GU10 reading light Waika…

What the source says: Practical on/off switch, the GU10 reading light Waika has a rocker switch with which the light can be switched on and off.

Why this matters: The holder keeps the later choice open, but calls for a suitable combination of design, maximum power, colour temperature and, where relevant, dimmability. The term comes from the listing. The manufacturer's page lists the product as a wall spot with two short spot heads. That is an accent and wall light that suits reading if you fit a low-glare light bulb and choose the height sensibly, but it is not a reading light with an adjustable arm.

Listing detail: Replaceable light bulb GU10 holder, the wall lamp…

What the source says: Replaceable light bulb GU10 holder, the wall lamp has a GU10 holder, which allows you to choose a suitable light bulb as you wish. Create your individual lighting concept, suitable for any environment.

Why this matters: The lamp holder keeps the later choice open, but requires a suitable combination of shape, maximum power, colour temperature and, where relevant, dimmability.

Listing detail: Tiltable lamp head, the 2 LED spots can be tilted by 90 degrees…

What the source says: Tiltable lamp head, the 2 LED spots can be tilted by 90 degrees and rotated by 330 degrees. This flexibility allows the spotlight to illuminate specific areas and set accents.

Why this matters: Adjustability is only useful if the range of movement stays free at the planned location and the lamp holds its position reliably.

Listing detail: 230 V connection, thanks to the direct connection to 230 V…

What the source says: 230 V connection, thanks to the direct connection to 230 V the wall light is ready for operation immediately and enables efficient and reliable lighting. The need for an additional transformer is eliminated.

Why this matters: This point should be checked against dimensions, instructions and the existing installation before buying. A listing can contain variants or shortened wording. The note about a direct 230 volt connection sounds like a device that is ready to use at once. According to the manufacturer, however, a three-pole terminal block sits on the unit, and a plug is not documented anywhere. Expect a fixed connection, and in case of doubt have a qualified electrician do it.

Listing detail: More Waika lights available, combine…

What the source says: More Waika lights available, combine the light with other lights of the Waika system and create your own uniform and functional lighting installation.

Why this matters: For the assessment, what counts is whether this property brings a concrete benefit in everyday use. Without a suitable lighting task it remains mainly a data sheet point. We have not checked the statement about further lights in the WAIKA system. The manufacturer's page documents only this two-lamp version, and other models in the series are not assessed here.

Use in daily life

In everyday use, mounting, connection and controls count. It is mounted with two wall plugs and two screws, which are included according to the manufacturer. It is connected through a three-pole terminal, a plug is not documented anywhere, so it needs a supply cable at the wall rather than a socket. The light is operated with a rocker switch on the unit, and according to the manufacturer the heads tilt by 90 degrees and rotate by 330 degrees.

For this model, the purchase decision should therefore hinge on a concrete situation. Before buying, write a sentence such as: “I need light for …” and add place, time of day and activity. If the model does not clearly fulfil this task, an alternative from the same category is probably the better choice.

What the light is not built for: it is not general lighting for the whole room, but sets accents and provides targeted light. With an IP20 rating it does not belong in the bathroom or outdoors. For reading it only works with low-glare lamps and a suitable mounting height. Use of light does not replace medical treatment, and the light makes no therapy claim.

Strengths and limits of the assessment

What speaks for the model

  • Product image, ASIN and listing data are clearly linked to one another.
  • The design can be matched to a specific lighting task: accent and reading light on the wall with its own GU10 lamp, not for plugging in and not for the bathroom.
  • The available features allow a targeted check before buying, without inventing a star rating.

What remains open

  • No long-term use of our own, no light measurement and no documented load check.
  • Listing details can be abbreviated or change with variants and model updates.
  • Room effect, glare and ease of use depend on your location and daily routine.

The purchase usually fails on the connection: anyone expecting a plug-in light gets a device with a terminal. Second, on the lamps, because without a suitable GU10 light bulb there is no light, and a bulb that is too bright dazzles when reading. Third, on the location, because IP20 rules out the bathroom and outdoors.

What you should measure and check before buying

Before buying, check whether a supply cable ends at the wall, because plug and cable are not documented. Measure the distance to the bed or armchair and the desired mounting height so that the spots do not shine into your eyes. Dimensions are missing from the material evaluated, so ask the seller about wall projection and width before buying.

  1. Clarify the task: Clarify whether you need reading light at the bed or accent light on the wall. These are two different classes of device.
  2. Check the connection: See whether a supply cable ends at the wall. Plugs are not documented, the connection is made through a terminal.
  3. Choose the light bulb: Buy two GU10 lamps, low-glare and in a suitable colour temperature, up to 60 watts per holder.
  4. Check the location: IP20 means a dry interior, so no bathroom and no outdoor use.
  5. Cross-check variant and model code: Compare the item number with LC-L-286 for black on the manufacturer's page and clarify open dimensions with the seller.

If you are unsure how much light your room needs at all, work it out once: the lumens-to-watts chart translates wattage figures into actual brightness, and how many lumens per room are needed depends on area and activity. Further models from this area are in the overview under home lighting, and the lighting calculator translates your room into a concrete target brightness.

Set-up, position and first check

During installation the supply cable is what counts: according to the manufacturer the light is connected to a terminal, not plugged in. Switch off the circuit breaker and, in case of doubt, call a qualified electrician, because work on the fixed installation is reserved for registered electricians. Mark the two drill holes, check the wall with a cable detector and only then fit the GU10 lamps.

After set-up, do not judge the light only in daylight. In the evening, switch the rest of the lighting as you normally use it, and check the situation from seated, standing and walking height. Only then do disturbing reflections, hard shadows or an unfavourable switch position become visible.

Keep the instructions and the model designation. This helps with spare parts, with a later query about the product and in a guarantee claim. The light bulb and lamp holder remain replaceable, so a later change of brightness or colour temperature is possible. This device is intended for indoor use only, and it is not approved for damp rooms or outdoor use.

Comparison with similar models

The comparison does not name winners. It shows models of the same category so that you can see whether one of them is closer to your lighting task. If two models have the same task in the Assessment column, they do not differ in purpose but in design, dimensions and features. The column then states what is actually different according to the sources.

ModelBrandAssessmentDetails
ledscom.de wall light WAIKA ledscom.de for accent and reading light on the wall with your own GU10 lamp, not plug-in and not for the bathroom This review
ERWEY wall reading lamp with touch dimmer and USB ERWEY for reading light at the bed from an existing socket, not for tenants without permission to drill, not for outdoor use and not as room lighting Read the analysis
ERWEY double reading lamp with 3 and 8 watts ERWEY for reading light at the bed from a socket within reach, without documented lighting data and not for hard-wired connection Read the analysis

Our buying decision

ledscom.de WAIKA wall light makes sense if you are looking for a wall light for accent and reading light on the wall with its own GU10 lamp, have checked the dimensions at the intended spot and will actually use the functions named in the listing. The purchase is less convincing if you expect one universal solution for several conflicting lighting tasks.

Keep looking if key data such as dimensions, light output, IP rating or compatibility is not clearly documented for your intended use. The same applies if you only like the look of the design, but the cable, the installation location or the controls would get in your way in daily use.

We deliberately award no stars. A numerical score would suggest a measurement accuracy that does not exist without documented hands-on testing. The statement this page can support is narrower: which details are available, what the model may be suited for, and which questions remain open before you buy?

Frequently asked questions about the wall light

Does it come with a plug, or does the light have to be hard-wired?

A plug is not documented anywhere. According to the manufacturer, the light is connected via a three-pole terminal block and is Class I. So expect a fixed connection to an existing supply cable, and in case of doubt have a qualified electrician do it.

Is a light bulb included?

No, the listing states explicitly that light bulbs are not included. You need two GU10 lamps, and the manufacturer's page allows up to 60 watts per holder.

Which GU10 lamps suit reading?

Choose low-glare lamps with a medium beam angle and a colour temperature that suits your room, often warm white for bedrooms. Brightness and wattage are determined by the lamp, not the light, so read them off the lamp's packaging.

How far can the spots be aimed?

According to the manufacturer and the listing, the heads can be tilted by 90 degrees and rotated by 330 degrees. Whether the joints stay in position over time is open, given no documented hands-on testing.

Can the light be fitted in the bathroom?

No, not without further checks. According to the manufacturer it has an IP20 rating, meaning a dry interior with no protection against splashing water. In the bathroom and outdoors you need a light with a suitable IP rating.

Can I dim the light?

The switch is a simple rocker switch. According to the manufacturer, only sets with a dimming function cycle through three brightness levels by repeated pressing. With the version offered here, without light bulbs, assume on and off only.

Sources and currency

The sources are ranked by their closeness to the product: manufacturer documents come before retailer or comparison data. A shop listing is useful for the variant currently on offer, but it is not an independent check. Missing documents are not replaced with invented experiences.

Content checked on 21 October 2026. Prices, availability and product variants can change independently of this page. For the final check, always use the current retailer listing and any available manufacturer documents.

If a linked source is no longer reachable, or the model on offer visibly differs from the product image and designation, this analysis is no longer the right basis for a decision. In that case the current model number is what counts. Tell us about the difference via the contact page (in German), so that the data, the link and the recommendation can be checked.

More analyses in this category