Does the model suit your lighting task?
FOMYHEARD touch bedside lamp, set of two, battery-powered with timer and colour change, stands in this selection for dimmed orientation light at the bedside, for night feeds and for nappy changes. It is not meant as a reading lamp, and the listing gives no figure at all for luminous flux or colour temperature. That is a narrower and more honest statement than a blanket “good” or “bad”. A lamp can be technically sound and still disappoint in the wrong place. That is why this review begins with the intended use, not with a score.
A room feels calmer when not every task depends on a single very bright ceiling light. Ambient light provides orientation, zone lighting brings brightness to a table or armchair, and accent lighting gives walls or furniture depth.
For this model, 6 readable product features from the Amazon listing are available. They are not presented as independently confirmed measured values. We explicitly separate what the source states from our practical assessment. We do not claim any long-term, laboratory or room evaluation of our own. We reproduce the quoted listing texts unchanged in content, but apply the house punctuation: dashes become a colon or comma, ranges of values are written out with “to”, and special characters and promotional symbols are removed. Numbers, units and statements are left untouched.
Product data and sources
| Product | FOMYHEARD touch bedside lamp two-pack, battery operated with timer and colour change |
|---|---|
| Brand | FOMYHEARD |
| Category | Home lighting |
| ASIN | B0GFWF98BV |
| Sources as of | 13 August 2026 |
| Type of research | Data and source analysis; no laboratory or long-term trial of our own |
Listing detail: LED bedside lamp touch
What the source says: LED bedside lamp touch: Switch the night light on simply by touching the control panel and off again by pressing and holding. Simply touch the control panel on the top of the lamp to change the desired colour. This kids night light is perfectly suited to relaxing ambient lighting, for the child's room, for nursing and changing nappies, for reading and for a romantic atmosphere.
Why this matters: Check how many ways of operating it there really are and whether each of them remains reachable at the planned spot. It also matters whether the device stores the setting last chosen and whether an accidental touch changes a setting. The same gesture is assigned twice in the listing. Here a long press switches the lamp off, two points further on a long press dims steplessly. The same goes for a short touch: once it changes the colour, once the brightness setting. Which of the two descriptions applies to the lamp delivered is not clarified by any document, and in the dark that is exactly the difference between one grab and a guessing game.
Listing detail: 5 modes 256 RGB colours & warm white
What the source says: 5 modes 256 RGB colours & warm white: The cordless table lamp has 5 lighting modes (warm white, constant, flashing, strobe and fade) with over 256 RGB colour combinations for different occasions. This dimmable touch bedside lamp can be used as ambient or mood lighting in your room to create different moods. With this bedside lamp without cable your room always shines in beauty and joy.
Why this matters: Check how many ways of operating it there really are and whether each of them remains reachable at the planned spot. It also matters whether the device stores the setting last chosen and whether an accidental touch changes a setting. The number sounds technical and says nothing about light quality. 256 is not a colour depth but a fixed palette, and for the night only one setting is of interest anyway, namely the warm white. For precisely this white the listing gives no colour temperature in kelvin. The brand enters 2,700 kelvin for two of its sister lamps, which would be the right range for the night, but for this model the figure appears nowhere. Two of the five modes are party patterns and do not belong at a child's bed. The listing gives no flash frequency for either of them, and that would be the value by which people with photosensitivity could judge whether they need to avoid the mode. Since the lamp is operated through a single touch surface, these patterns are, if in doubt, one touch away.
Listing detail: 5 brightness levels & stepless dimming
What the source says: 5 brightness levels & stepless dimming: Press briefly to switch between brightness levels: reading in bright light, relaxing in warm light, falling asleep in soft light; press and hold for stepless dimming. The dimmable baby night light offers a cosy and warm light for the night, more even and gentle, soft and easy on the eyes, ideal for sleeping and for creating an atmosphere.
Why this matters: Dimmable is only a usable statement once the way of operating it and the settings are clarified. With a permanently built-in LED, only the electronics in the device decide, and a wall dimmer upstream is neither necessary nor intended here. Five fixed settings and stepless dimming do not rule each other out if two different gestures are behind them, and the listing describes it that way too. The catch is the range: from the listing's own run times follows a ratio of 8 between the brightest and dimmest setting, which is around 12.5 per cent at the bottom. A night light that dims down even further does exist, here it stops at about 6 lumens.
Listing detail: 1500mAh rechargeable portable night light baby
What the source says: 1500mAh rechargeable portable night light baby: USB rechargeable soothing light, dimmable, fully charged in approx. 3-4 hours, brightest/dimmest lasts approx. 10/80 hours of battery life, have a rechargeable bedroom light to keep your bedroom lit the whole time! Portable bedside lamp for kids with hidden hanging loop, can be hung on the cot, also suitable for outdoor camping or hiking.
Why this matters: Dimmable is only a usable statement once the way of operating it and the settings are clarified. With a permanently built-in LED, only the electronics in the device decide, and a wall dimmer upstream is neither necessary nor intended here. The first of the two figures is the critical one. 1,500 milliamp hours at 3.7 volts is around 5.55 watt hours, divided by 10 hours that is about 0.56 watts on the brightest setting. FOMYHEARD itself states 1.2 watts for two similarly built sister lamps, and with that the battery would be flat after 4.6 hours. The 80 hours on the dimmest setting, by contrast, are plausible and give around 69 milliwatts, so just under 6 lumens by the brand's own values. A loop on an object that is expressly advertised for the child's bed is not something to adopt without a second look. The listing gives neither the length of the loop nor an age rating nor a standard for children's products, and there is no document for this model in which that would be stated. The device also contains a lithium battery with no information on voltage, cell chemistry or watt hours. If in doubt, hang the lamp out of the child's reach or stand it on a surface.
Listing detail: Timer and memory function, the night lamp's integrated…
What the source says: Timer and memory function, the night lamp's integrated timer with automatic switch-off after 1, 2 or 3 hours helps to save energy and ensures worry-free sleep all night long. The touch dimmer bedside lamp's memory function automatically restores the last brightness, colour and lighting mode used, so you do not have to make the settings again every time.
Why this matters: Check how many ways of operating it there really are and whether each of them remains reachable at the planned spot. It also matters whether the device stores the setting last chosen and whether an accidental touch changes a setting. The timer switches off after 3 hours at the latest and so does not cover the whole night, and another bullet point even wants to keep the bedroom lit the whole time. Both at once is impossible. For a bedside lamp, however, automatic switch-off is the more sensible property anyway, and with around 80 hours on the lowest setting one charge lasts many nights. The memory function in the same point is the strongest part of this listing, because it restores the brightness, colour and mode of the last use.
Listing detail: Great gift, worry-free after-sales experience
What the source says: Great gift, worry-free after-sales experience: This touch lamp is a perfect holiday and birthday gift for kids, family and friends! The bedside lamp offers 24-hour customer service and lifelong technical support so that you can enjoy a worry-free shopping experience. If you have any questions, please contact us by email
Why it matters: This is a promise by the seller from the listing text, not manufacturer evidence and not an additional legal right. Your statutory consumer rights apply regardless. A voluntary guarantee only counts once its conditions are available in writing.
Use in daily life
In this model the light source is permanently installed. There is no holder and no replaceable light bulb, so brightness, colour temperature and the type of dimming are fixed from the factory. At the end of its rated lifetime you therefore replace the complete light and not the lamp. That makes the purchase decision more final than with a light that has a screw-in holder.
For this model, the purchase decision should therefore hinge on a concrete situation. Before buying, write a sentence such as: “I need light for …” and add place, time of day and activity. If the model does not clearly fulfil this task, an alternative from the same category is probably the better choice.
A hard-wired mains connection does not apply to this model, and with it the questions about bathroom zones and electrical installation. Other points move to the front instead: the run time per charge or set of batteries, the route to the nearest place to charge and stability at the planned spot. It is on these points that this design fails in everyday use more often than on the amount of light.
Strengths and limits of the assessment
What speaks for the model
- Product image, ASIN and listing data are clearly linked to one another.
- The design can be matched to a specific lighting task: for dimmed orientation light at the bedside, for night feeds and for nappy changes, not as a reading lamp, and with no figure at all for luminous flux or colour temperature.
- The available features allow a targeted check before buying, without inventing a star rating.
What remains open
- No long-term use of our own, no light measurement and no documented load check.
- Listing details can be abbreviated or change with variants and model updates.
- Room effect, glare and ease of use depend on your location and daily routine.
The sore point is the run time on the brightest setting: 1,500 milliamp hours at 3.7 volts is 5.55 watt hours, and with the 1.2 watts that FOMYHEARD states for its own sister lamps that would be 4.6 hours instead of the promised 10. There is also no information on luminous flux, colour temperature or colour rendering for exactly this model, and the brand has neither a reachable website nor an entry in the EU product register. The description of the controls also contradicts itself in two places, because a short touch and a long press are each assigned two different functions. If, on the other hand, you want two feeding lights that can be dimmed down very far and remember the last setting, you get them here, because the dimmest setting comes to just under 6 lumens by calculation and so is right.
What you should measure and check before buying
First measure the height of your shelf above the mattress and check whether the lamp stands there below the eye level of the child lying down, because only then does it work as an orientation light and not as a source of glare. Look at the standing surface, because two lamps arrive and both need a safe place out of reach, since each contains a lithium battery for which neither voltage nor watt hours are stated. Check where the nearest USB socket is and whether you can charge two devices there at the same time. If you want to use the hanging loop, look closely at the planned spot beforehand and keep it out of the child's reach.
- Define the task: Write down which surface or zone is to be lit and at what time of day you use it.
- Measure the space: Check the standing or mounting surface, height, cable route and reachable socket. Product photos are no substitute for measurements.
- Compare the light data: Check light output, colour temperature, dimming and, if needed, IP rating in the current listing text. There is no manufacturer document to consult for this item.
- Think through the controls: The switch, app, sensor or remote control must be reachable and understandable in daily use at the planned location.
- Check the variant: Colour, size and set contents can differ within one listing, and often the technical details in the description text with them. Compare the selected variant with this analysis.
If you are unsure how much light your room needs at all, work it out once: the lumens-to-watts chart translates wattage figures into actual brightness, and how many lumens per room are needed depends on area and activity. Further models from this area are in the overview under home lighting, and the lighting calculator translates your room into a concrete target brightness.
Set-up, position and first check
Assign each lamp to exactly one task. Then check colour temperature, controls and possible glare in the evening. For permanently installed lamps, the installation instructions must match the existing connection; improvised solutions are not a good basis.
After set-up, do not judge the light only in daylight. In the evening, switch the rest of the lighting as you normally use it, and check the situation from seated, standing and walking height. Only then do disturbing reflections, hard shadows or an unfavourable switch position become visible.
Note the model number and order date and keep whatever paperwork is in the box. For this item there is neither a manual nor a manufacturer page to download, and in a complaint the retailer is the only point of contact. Both are, in a guarantee claim, the only proof of which device you bought. Replacing the light source is not provided for, and at the end of its rated lifetime the complete device is replaced.
Comparison with similar models
The comparison does not name winners. It shows models of the same category so that you can see whether one of them is closer to your lighting task. If two models have the same task in the Assessment column, they do not differ in purpose but in design, dimensions and features. The column then states what is actually different according to the sources.
| Model | Brand | Assessment | Details |
|---|---|---|---|
| FOMYHEARD touch bedside lamp two-pack | FOMYHEARD | for dimmed orientation light by the bed, when nursing and when changing, not as a reading lamp and without a single figure for luminous flux or light colour | This review |
| WALDWERK oak and metal bedside lamp - dimmable… | WALDWERK | for short, subdued periods of light | Read the review |
| Philips Hue White & Color Ambiance Go portable table lamp | Philips Hue | for short, subdued periods of light | Read the review |
Our buying decision
FOMYHEARD touch bedside lamp, set of two, battery-powered with timer and colour change makes sense if you are looking for a lamp for dimmed orientation light at the bedside, for night feeds and for nappy changes, have checked the dimensions at the intended spot and will actually use the functions named in the listing. The purchase is less convincing if you expect a universal solution for several conflicting lighting tasks.
Keep looking if key data such as dimensions, light output, IP rating or compatibility is not clearly documented for your intended use. The same applies if you only like the look of the design, but the cable, the floor space or the controls would get in your way in daily use.
We deliberately award no stars. A numerical score would suggest a measurement accuracy that does not exist without documented hands-on testing. The statement this page can support is narrower: which details are available, what the model may be suited for, and which questions remain open before you buy?
Frequently asked questions about the home light
How dark does the lowest setting really get?
According to the listing's own figures it is about 69 milliwatts, because 5.55 watt hours divided by 80 hours gives exactly that. With the roughly 83 lumens per watt that FOMYHEARD itself states for its sister lamps (100 lumens at 1.2 watts), that comes to just under 6 lumens. That is the order of magnitude a night light should have, and exactly right for a room where someone is sleeping.
Does the warm white stay on permanently, or does the lamp only cycle through colours?
According to the listing, warm white is one of the five modes and so a permanent state, not a point in a sequence. The memory function also restores the brightness, colour and mode of the last use, so you do not have to look for your setting every night. Both are supplier claims, but they are the two claims that matter most for a bedside lamp. What colour temperature in kelvin this white has, however, nobody says.
Do the 10 hours on the brightest setting hold up?
No, and this can be shown from the brand's own figures. 1,500 milliamp hours at 3.7 volts is 5.55 watt hours, and FOMYHEARD states 1.2 watts for two similarly built sister lamps, which would flatten the battery after 4.6 hours. The 10 hours, by contrast, require 0.56 watts at most, which is less than half. On the lowest setting the figures do agree: 80 hours is unremarkable on paper.
How is it charged, and which connector does the lamp have?
The listing says USB-rechargeable and names neither USB-C nor micro-USB, and there is no document in which it would be stated. By calculation, 1,500 milliamp hours in 3 to 4 hours is 375 to 500 milliamps, a charging current that any USB port supplies. Allow for the fact that you will have to charge two lamps, and that nowhere does it say whether the lamp may stay lit while charging.
Is there a manufacturer document for this exact model?
No, and there is none for FOMYHEARD at all. We checked fomyheard.com, fomyheard.de, fomyheard.net, fomyheard.shop, fomyheard.store, fomyheard.eu, fomyheard.co.uk, fomyheard.top and fomyheard.online, and none of these addresses has an entry in the domain name system. In the EU product register EPREL there is not a single record under the trade name. The only reliable figures come from the listings of two sister models of the same brand.
Should this lamp be in the EU product register?
In our reading, no. Regulation (EU) 2019/2015 expressly excludes light sources in battery-powered products in Article 1, and a purely rechargeable lamp with no mains connection falls under that. In addition, the definition of a light source only starts at 60 lumens, and by our calculation this lamp, at around 46 lumens, is below that. The missing entry is therefore the correct consequence of the design and size, not a sign of a gap.
Sources and currency
The sources are ranked by their closeness to the product: manufacturer documents come before retailer or comparison data. A shop listing is useful for the variant currently on offer, but it is not an independent check. Missing documents are not replaced with invented experiences.
- Listing text and data block for ASIN B0GFWF98BV with all the figures on this page: 1,500 milliamp hours, 3 to 4 hours charging time, around 10 hours on the brightest and around 80 hours on the dimmest setting, 5 lighting modes, 5 brightness settings plus stepless dimming, over 256 RGB colour combinations, timer after 1, 2 or 3 hours, memory function for brightness, colour and mode, hidden hanging loop, set of two. The data block gives model number DFA6510, brand and manufacturer each FOMYHEARD, country of origin China, lighting method LED and 2 units. Luminous flux, colour temperature in kelvin, colour rendering index, power consumption, battery voltage, the type of charging socket and an age rating are missing entirely. Among the 55 ratings, the only criticism of substance is that the instruction manual is sparse. Amazon listing B0GFWF98BV, not linked
- Sister model of the same brand on the same marketplace, FOMYHEARD single lamp with a wood look. The brand's image text there gives exactly the values that are missing in the set of two: light colour 2,700 kelvin and 100 lumens, main material ABS and PP. The data block gives a wattage of 1.2 watts, timer after 1, 2 or 4 hours and a voltage of 1.5 volts. The battery information contradicts itself within the same listing: the heading gives 1,200 milliamp hours, the body text below it a 2,000 milliamp battery, the run time is given as 12 to 100 hours and the charging time as 2.5 hours. Amazon listing B0CNXLP85M, not linked
- Second sister model of the same brand, FOMYHEARD model number T1-H088, 9 by 9 by 12.5 centimetres, 260 grams. Here too 2,700 kelvin and 100 lumens appear in the image text and 1.2 watts in the data block, plus power supply battery-operated, voltage 1.5 volts DC, shade material ABS, PC and PP, timer after 1, 2 or 4 hours and 18 months guarantee. The same data block lists a GU10 lamp base and an A19 bulb shape for a sealed rechargeable lamp, and the value Fake in the waterproof field. Amazon listing B0BZYQGN1K, not linked
- Third sister model of the same brand, FOMYHEARD model number S300P in an egg shape with a magnetic base. It gives a battery of 2,500 milliamp hours, a run time of 6 to 100 hours, a timer of exactly 1 hour, material ABS, PC and BPA-free silicone, a voltage of 5 volts DC and, as age group, expressly baby. The same brand therefore gives four different battery sizes, three different timer staggerings and two different voltages for four similarly built night lights. Amazon listing B0C61D3N1Z, not linked
- Commission Delegated Regulation (EU) 2019/2015, full text (in German). Article 1(2) expressly excludes light sources in battery-powered products from the scope, naming torches, mobile phones with an integrated torch and toys with light sources, among others. The definition of a light source only starts at a luminous flux of 60 lumens and ends at 82,000 lumens. Annex II gives the efficiency classes from A at 210 lumens per watt to G below 85 lumens per watt, as well as the correction factors 1.000 and 0.926 for non-directional light sources on mains and off mains.
- Amazon.co.uk product listing B0GFWF98BV; product data via the Creators API, retrieved 13 August 2026 Advertisement
Content checked on 13 August 2026. Prices, availability and product variants may change independently of this page. For the final check, always use the current retailer listing and any available manufacturer documents.
If a linked source is no longer reachable, or the model on offer visibly differs from the product image and designation, this analysis is no longer the right basis for a decision. In that case the current model number is what counts. Tell us about the difference via the contact page (in German), so that the data, the link and the recommendation can be checked.
