Does the model suit your lighting task?
Nanoleaf Matter Essentials E27 four-pack, RGBW with Wi-Fi, Bluetooth and Matter stands in this selection for four E27 lamps with colour and white light directly over your own Wi-Fi, without Thread radio and on the 2.4 GHz network only. That is a narrower and more honest statement than a blanket “good” or “bad”. A lamp can be technically sound and still disappoint in the wrong place. That is why this review starts with the intended use, not with a score.
A single Wi-Fi lamp can make sense without an additional hub. With many lights, sensors and switches, a hub system often becomes clearer to manage. The right architecture therefore depends more on the planned expansion than on the first device you buy.
For this model there are 5 readable product features from the Amazon listing. They are not presented as independently confirmed measured values. We explicitly separate what the source states from our practical assessment. We do not claim any long-term, laboratory or room trials of our own. We reproduce the quoted listing texts unchanged in content, but apply the house style for punctuation: dashes become a colon or comma, ranges are written out with “to”, and special characters and advertising symbols are removed. Numbers, units and statements are left untouched.
Product data and sources
| Product | Nanoleaf Matter Essentials E27 4-pack, RGBW with Wi-Fi, Bluetooth and Matter |
|---|---|
| Brand | Nanoleaf |
| Category | Smart lighting |
| ASIN | B0DS5DPY34 |
| Sources as of | 7 August 2026 |
| Type of research | Data and source analysis; no laboratory or long-term trial of our own |
Listing detail: Matter-capable, Matter enables compatibility…
What the source says: Matter-capable, Matter enables compatibility with major smart home ecosystems and gives users more options to customise their smart homes and make them future-proof. The Matter experience across all smart home ecosystems will keep evolving and improving as these leading providers work to integrate Matter even better into their products.
Why this matters: The system information should be checked against your existing smart home. Basic functions and manufacturer-specific effects are not automatically available in the same way on every platform. Matter runs over Wi-Fi here, not over Thread. For integration into Apple Home, Google Home, Alexa or SmartThings, Nanoleaf requires a Matter-capable hub in the household as well as iOS or tvOS 16.5 or later or Android 8.1 or later; without a hub, control remains via the Nanoleaf app.
Listing detail: Works over Wi-Fi
What the source says: Works over Wi-Fi: Easier to access and simpler to set up for everyone. Control directly via the Nanoleaf app with Wi-Fi and Bluetooth, or connect to a smart home ecosystem via Matter over Wi-Fi.
Why this matters: The system information should be checked against your existing smart home. Basic functions and manufacturer-specific effects are not automatically available in the same way on every platform. The manufacturer states Wi-Fi at 2.4 GHz to b/g/n, Bluetooth Low Energy and Matter over Wi-Fi. The lamp does not support a 5 GHz network, and unlike the older Essentials lamps it has no Thread radio either.
Listing detail: Custom schedules, automate your…
What the source says: Custom schedules, automate your lighting so that it switches on or off at certain times and days to make your daily routines easier. Create your schedule with Apple Home, the Google Home app or another Matter-compatible app or voice assistant.
Why this matters: The system detail should be matched against your existing smart home. Basic functions and manufacturer-specific effects are not automatically available in the same way on every platform.
Listing detail: Maximise comfort and productivity…
What the source says: Maximise comfort and productivity, with circadian lighting you can set your lamps to adapt automatically to the colour temperature of the sun, based on your time zone or manual settings. This function helps you recharge your energy during the day and prepares you naturally for rest at night by removing blue light. (Requires firmware 3.5.0+)
Why this matters: The stated light colour describes the effect, not the brightness. In daily use it matters whether fixed levels or a continuous range are offered and whether the setting is saved. This is documented. Nanoleaf names firmware 3.5.0 or newer on both manufacturer pages checked as a requirement for circadian lighting. For screen mirroring, the same page additionally requires a Thread border router, which does not fit a pure Wi-Fi lamp.
Listing detail: Limitless colours & the brightest white tones, 16M colours
What the source says: Limitless colours & the brightest white tones, 16M colours: Nearly unlimited colour options. Choose your preferred colour or create colour-changing scenes for the perfect atmosphere. Vibrant whites: the brightest white lighting with an extended temperature range from cool to warm whites.
Why this matters: This point should be checked before buying against dimensions, instructions and the existing installation. A listing may contain variants or shortened wording. Nanoleaf quantifies this itself: 900 lumens on average and 1,000 lumens as the maximum per lamp at 9 watts, plus 2700 to 6500 kelvin and a colour rendering index of 90 or above. That is brighter than the 806 lumens of the same brand's Thread predecessors, but not a peak value on the market.
Use in daily life
Matter improves cooperation between different platforms, but does not guarantee that every special function of a manufacturer app is available everywhere. Scenes, music modes or segment control may still remain tied to the respective app.
For this model, the purchase decision should therefore hinge on a concrete situation. Before buying, write a sentence such as: “I need light for …” and add place, time of day and activity. If the model does not clearly fulfil this task, an alternative from the same category is probably the better choice.
The wall switch remains a practical weak point. If a smart lamp is cut off from power there, the app and automations cannot be reached. Good planning therefore also clarifies how guests and other members of the household operate the light.
Strengths and limits of the assessment
What speaks for the model
- Product image, ASIN and listing data are clearly linked to one another.
- The design can be matched to a specific lighting task: for four E27 lamps with colour and white light directly over your own Wi-Fi, without Thread radio and on the 2.4 GHz network only.
- The available features allow a targeted check before buying, without inventing a star rating.
What remains open
- No long-term use of our own, no light measurement and no documented load check.
- Listing details can be abbreviated or change with variants and model updates.
- Room effect, glare and ease of use depend on your location and daily routine.
The sore point is the pure Wi-Fi connection. Each lamp is a separate network device, four lamps take up four places, and Nanoleaf itself draws a limit at 20 lamps on iOS and 10 on Android; a Thread mesh that takes load off the radio network is not available here, unlike with the predecessors. Added to that is the classic weakness of any smart lamp: anyone who turns off the wall switch takes it completely off the network, and then neither the app nor a voice command helps. Second, the source situation for the key figures is annoying. There is no EPREL registration for exactly this model, so 900 lumens, 9 watts and the efficiency rest solely on the manufacturer's documents and are not officially cross-checked. And third, with the Thread section and the screen mirroring, the product page promises functions for which this lamp simply lacks the radio.
What you should measure and check before buying
First measure the space in the lamp holder: the lamp body is 11.1 centimetres long and 6 centimetres thick, and in narrow shades, flat ceiling bowls and clamp lamps that gets tight. Then count how many E27 lamp holders you really want to supply, because a four-pack only pays off if all four lamps sit in places that have power permanently. Check in the router that a 2.4 GHz band is active and reachable during setup; you may have to make it visible separately for pairing. And check whether your household already has a Matter-capable device, that is, a HomePod, an Apple TV, or a Nest or Echo device, because only with one does integration into an ecosystem work.
- Define the task: Write down which surface or zone is to be lit and at what time of day you use it.
- Measure the space: Check cap, bulb length and diameter against the space in the existing lamp. Floor space, cable route and socket do not apply to this design. Product photos are no substitute for dimensions.
- Compare the light data: Check light output, colour temperature, dimming and, if needed, IP rating in the current listing or manual.
- Think through the controls: The switch, app, sensor or remote control must be reachable and understandable in daily use at the planned location.
- Check the variant: Colour, size, set contents and lamp holder can differ within a listing. Compare the variant you choose with this analysis.
If you are unsure how much light your room needs at all, work it out once: the lumens to watts chart puts wattage figures into terms of actual brightness, and how many lumens per room are needed depends on floor area and activity. More models in this area are listed in the overview under smart lighting, and the lighting calculator translates your room into a specific target brightness.
Set-up, position and first check
First set up a single light and check the app, voice control and behaviour after a power cut. Assign understandable room and device names. Only once the basic operation works reliably is it worth building scenes and automations.
After set-up, do not judge the light only in daylight. In the evening, switch the rest of the lighting as you normally use it, and check the situation from seated, standing and walking height. Only then do disturbing reflections, hard shadows or an unfavourable switch position become visible.
Keep the instructions and model designation. This helps with a new app setup, with firmware questions and in a warranty claim. The light bulb and lamp holder remain replaceable, so a later change of brightness or colour temperature is possible.
Comparison with similar models
The comparison does not name winners. It shows models of the same category so that you can see whether one of them is closer to your lighting task. If two models have the same task in the Assessment column, they do not differ in purpose but in design, dimensions and features. The column then states what is actually different according to the sources.
| Model | Brand | Assessment | Details |
|---|---|---|---|
| Nanoleaf Matter Essentials E27 4-pack | Nanoleaf | for four E27 lamp holders with coloured and white light directly over your own Wi-Fi, without Thread and only on the 2.4 GHz network | This review |
| Philips Hue White & Color Ambiance E27 LED light bulb | Philips Hue | for smart control in a technically suitable lamp holder | Read the review |
| Philips Hue White Ambiance E27 LED light bulb | Philips Hue | for smart control in a technically suitable lamp holder | Read the analysis |
Our buying decision
Nanoleaf Matter Essentials E27 four-pack, RGBW with Wi-Fi, Bluetooth and Matter makes sense if you are looking for a light bulb for four E27 lamps with colour and white light directly over your own Wi-Fi, without Thread radio and on the 2.4 GHz network only, have checked the dimensions at the intended spot and will actually use the functions named in the listing. The purchase is less convincing if you expect a universal solution for several conflicting lighting tasks.
Keep looking if key data such as dimensions, light output, IP rating or compatibility is not clearly documented for your intended use. The same applies if you only like the look of the design, but the cable, the floor space or the controls would get in your way in daily use.
We deliberately award no stars. A numerical score would suggest a measurement accuracy that does not exist without documented hands-on testing. The statement this page can support is narrower: which details are available, what the model may be suited for, and which questions remain open before you buy?
Frequently asked questions about the light bulb
How bright are the lamps, and what white range do they cover?
Nanoleaf states 900 lumens as the average and 1,000 lumens as the maximum per lamp, at 9 watts and a colour rendering index of 90 or above. The white range is documented as 2700 to 6500 kelvin, that is, from warm white to daylight white. The listing text contains none of these figures and only speaks of the brightest white tones.
Do I need a bridge or a hub for these lamps?
For control via the Nanoleaf app you do not need a manufacturer's hub: the lamps connect directly to the 2.4 GHz Wi-Fi and can additionally be addressed over Bluetooth. As soon as you want to integrate them into Apple Home, Google Home, Alexa or SmartThings, however, Nanoleaf requires a Matter-capable hub in the household, such as a HomePod, an Apple TV, or a Nest or Echo speaker. That is the key difference from Philips Hue, where the bridge is mandatory for the full range of functions.
Does this lamp run over Thread?
No. The manufacturer's technical table lists Wi-Fi at 2.4 GHz, Bluetooth Low Energy and Matter over Wi-Fi, and no Thread radio is listed. That the same product page nevertheless shows a Thread section and requires a Thread border router for screen mirroring is a text block carried over from the older Essentials range and the only clear contradiction in the documents.
Is the circadian lighting really tied to firmware 3.5.0?
Yes, and this is unusually well documented. Both the Nanoleaf product page and the Nanoleaf shop name firmware 3.5.0 or newer as a requirement, so the listing reproduces this note correctly. The function adjusts the colour temperature automatically to the course of the sun in your time zone and reduces the blue content in the evening; you have to update the lamps for it via the Nanoleaf app.
How many lamps can I pair, and is my router enough?
Nanoleaf gives an upper limit of 20 lamps on iOS and 10 on Android over Wi-Fi, and 5 over Bluetooth for a clean connection. Each lamp is a separate Wi-Fi device, so four lamps take up four places on your network. It is also important that your router offers a 2.4 GHz band and that it is reachable during setup, because the lamp does not support 5 GHz.
Is this model listed in the EU product register EPREL?
No, we did not find a matching entry. Under the brand name Nanoleaf, 20 light sources are registered, none of which lists 900 lumens at 9 watts with an E27 cap. Only the Thread predecessors NL67E200 and NL45-0800WT240E27, each with 806 lumens and class F, are officially recorded, which is why the lumens, watts and efficiency class of this Wi-Fi version rest solely on the manufacturer's statements.
Sources and currency
The sources are ranked by their closeness to the product: manufacturer documents come before retailer or comparison data. A shop listing is useful for the variant currently on offer, but it is not an independent check. Missing documents are not replaced with invented experiences.
- Nanoleaf product page for the four-pack with model identifier N7501B02-4A60E: firmware 3.5.0 or newer as a requirement for circadian lighting, Matter-capable hub as well as iOS or tvOS 16.5 or later or Android 8.1 or later for integration into an ecosystem, pack contents four lamps, two years' guarantee. The same page also contradictorily shows a section on Thread.
- Nanoleaf shop Europe, technical table for the same four-pack: 900 lumens average and 1,000 lumens maximum brightness, 9 watts with ten per cent tolerance, under 0.5 watts standby power at 230 volts, 2700 to 6500 kelvin, colour rendering index of 90 or above, colour channels RGBCW, cap E26/E27/B22, 6.1 by 11.1 centimetres, 25,000 hours rated lifetime, Wi-Fi 2.4 GHz b/g/n, Bluetooth Low Energy, Matter over Wi-Fi, a maximum of 20 lamps on iOS and 10 on Android over Wi-Fi and 5 over Bluetooth.
- Nanoleaf shop UK for the two-pack of the same range, confirms protocols, brightness and pairing limits independently of the pack size
- EU product register EPREL, query by the brand name Nanoleaf: 20 registered light sources, none of them with 900 lumens at 9 watts and an E27 cap. For the Wi-Fi version sold here, there is therefore no entry.
- EPREL entry 1343226 for the predecessor model NL67E200 with Thread radio: 806 lumens, 9 watts, energy efficiency class F, colour rendering index 91, 2700 to 6500 kelvin, E27 cap. Serves as a yardstick for comparison, not as evidence for this model.
- EPREL entry 296918 for the older Essentials lamp NL45-0800WT240E27: likewise 806 lumens, 9 watts, class F, colour rendering index 91
- Our data check on the Nanoleaf Shapes Triangles, in which we have already worked through the gaps in Nanoleaf's documents on lumens and power consumption once
- Amazon product listing B0DS5DPY34; product data via the Creators API, retrieved 7 August 2026 Advertisement
Content checked on 7 August 2026. Prices, availability and product variants can change independently of this page. For the final check, always use the current retailer listing and any available manufacturer documents.
If a linked source is no longer reachable, or the model on offer visibly differs from the product image and designation, this analysis is no longer the right basis for a decision. In that case the current model number is what counts. Tell us about the difference via the contact page (in German), so that the data, the link and the recommendation can be checked.
